BE SURE TO READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. Identify Your Parts: (See below)
“U” shaped bracket
“L” shaped bracket (long slide opening; short slide opening)
Set screw
Bracket screw
Mounting screws
Wall anchors
Bracket Installation:
- Find position on wall, locate center of short slot and mark on wall. Drill pilot hole and insert wall anchor. (Wall anchors may not be necessary for all applications.)
- Loosely attach "L" bracket to wall using a mounting screw through short slot. Adjust to desired height.
- Mark spot on wall for stationary mounting screw. Drill pilot hole and insert wall anchor.
- Tighten screws.
- Repeat steps for second bracket. (For added support, use center bracket for 48-84 and 60-112 sets).
Rod and Drapery Installation:
- Remove screw from "U" bracket
- Attach "U" bracket to "L" bracket as shown below
- Adjust to desired distance from wall and tighten screw. Repeat steps for second bracket.
- Place draperies on rod and hang on brackets.
- Tighten set screws to lock rod in place.
- Attach finials.
